Jumpers And Switches - VIA Mainboard 845G Series Manual

Hardware Installation
System Panel Buttons, Speaker and LED Connectors
PW
Power On/Off and Suspend Switch Connector.
S3L STR LED Connector (optional)
HL
HDD LED Connector
RS Reset Button Connector
PWR-LED
Power LED
SPK Speaker Connector
JP1
KB/MS Power On
JP2 USB 1/2 Wake-Up
JP3
STR(S3) function (optional)
JP4 CPU FSB Clock Select
JP5
Clear CMOS
JP6 Clear Password
'! "#!
You need to complete the following installation steps before you use your PC.
!
Check and set the mainboard settings.
!
Install the Central Processing Unit (CPU).
!
Install the memory modules.
!
Install the expansion cards.
!
Connect the ribbon cables, panel wires and power supply.
!
Setup the system BIOS
Before you start installing your mainboard we strongly recommend
that you use a grounded anti-static mat. We further recommend
that you attach an anti-static wristband, which is grounded at the
same location as the mat, to your wrist. Please refer the picture of
an anti-static mat and wristband below.
Page 12 The 845G MAINBOARD Series

Jumpers and Switches