NAPCO LIBRA-P432EX Series Programming Instructions Manual page 43

New
Compat #
EZM Address
Zone Response
Program Control
Message #
NAPCO Security Systems
Compatibility Number (Not Applicable)
THIS FEATURE IS NOT COMPATIBLE WITH THE LIB-P432EX CON-
TROL PANEL. DO NOT CHANGE THIS SETTING.
0000
Press the
w
EZM Address
THIS FEATURE IS NOT COMPATIBLE WITH THE LIB-P432EX CON-
TROL PANEL. DO NOT CHANGE THIS SETTING.
01
Press the
w
Zone Response
THIS FEATURE IS NOT COMPATIBLE WITH THE LIB-P432EX CON-
TROL PANEL. DO NOT CHANGE THIS SETTING.
00
Press the
w
Program Control Message (Not Applicable)
THIS FEATURE IS NOT COMPATIBLE WITH THE LIB-P432EX CON-
TROL PANEL.
?
Press the
w
lections, for changes) or press the
figuration Mode (display will read "
place Jumper JP1 across Pins 1–2 (top two).
button to continue or press the
button to continue or press the
button to continue or press the
button to continue (the display will loop back through se-
y
01 OUT OF SYSTEM
LIBRA LIB-P432EX Series Programming Instructions
Page 43
button to exit.
y
button to exit.
y
button to exit.
y
button to exit the Keypad Con-
"). Then re-