Table of Contents
Advertisement
35_020_4849_2_DFU-Luxury_A6_v1.indd 7
Preparing for use
Attaching the brush head
1
Align the front of the brush head with the
front of the toothbrush handle.
2
Push the brush head onto the metal shaft.
Note: There is a small gap between the brush head and
the handle.
Charging the appliance
1
Put the plug of the charger in the electrical
outlet.
2
Place the handle on the charger.
, The battery charge indicator shows the
approximate remaining battery charge.
- Solid green light: 20-100%
- Flashing green light: 5-19%
- Flashing green light and 3 beeps after the brushing
cycle: less than 5% and toothbrush has to be
recharged.
Note: To keep the battery fully charged at all times, you
may keep your Sonicare on the charger when not in
use. It takes at least 24 hours to fully charge the battery.
Using the appliance
1
Wet the bristles and apply a small amount
of toothpaste.
ENGLISH
7
22/03/16 11:10
Advertisement
Table of Contents
