General Description (Fig. 1); Preparing For Use - Philips sonicare DiamondClean HX9312 Manual

8
English

General description (Fig. 1)

1 Brush head
2 Handle with ergonomic shape
3 Recessed power on/off button
4 Hidden brushing mode display
5 Charge indicator
6 Hygienic travel cap
7 Charging glass (select models)
8 Charging base (select models)
9 Charging travel case (select models)
10 USB wall adapter (select models)
11 USB cord (select models)
Note: The content of the box may vary based on the model
purchased.

Preparing for use

Attaching the brush head
1 Align the brush head so the bristles point in the same direction as
the front of the handle (Fig. 2).
2 Firmly press the brush head down onto the metal shaft until it stops.
Charging your Philips Sonicare
1 Plug the charger into an electrical outlet.
2 Place charging glass (select models) on top of the charging base
and place handle in glass (Fig. 3).
-
The charge indicator flashes green until fully charged (Fig. 4).
-
Rapid yellow flashing indicates charge is extremely low
(fewer than 3 uses left).
Charger:
- HX9100: 100-240V ~, 50/60Hz, 0.4-1.4W
- HX9200: 100-240V ~, 50/60Hz, 3.5W
Note: It takes at least 24 hours to fully charge the battery.
This charger is designed to properly charge only one handle at a time.
This charger is not compatible with other models of Sonicare.
35_021_4218_1_DFU-Booklet_A6_v7.indd 8 29/11/17 10:48