Chimney Assembly - NEFF D99W44N0 Operating And Installation Instructions

Installation
Connection in Recirculation Version
All the items named in this procedure are
included in the recirculation kit. The correspond-
ing accessory numbers can be found at the end
of these operating instructions.
q Put connection 15 into the connection support
en
7.3, previously fix with the upper bracket sup-
port chimne 7.2.1, and secure with a screw.
q Insert the connection extension pieces laterally
14.1 in connection 15.
q Make sure that the outlet of the extension
pieces 14.1 is horizontally and vertically aligned
with the chimney outlets.
q Connect the air outlet connection 15 to the
hood body outlet using either a pipe ø 150 mm.
q Use the jubilee clips 25 to ensure a fix connec-
tion between pipe and hood outlet and between
pipe and connection (15).
q Ensure that the activated charcoal filters have
been inserted.(see parag. "Activated carbon
filter" in Filters and Maintenance chapter)
���
��
��
24
����
�����

Chimney assembly

Upper Chimney
q Slightly widen the two sides of the upper Chim-
ney and hook them behind the brackets 7.2.1,
making sure that they are well seated.
q Secure the sides to the brackets using the 4
screws 12c supplied.
q Make sure that the outlet of the extensions
pieces is aligned with the chimney outlets.
��
Lower Chimney
q Slightly widen the two sides of the Chimney
and hook them between the upper Chimney
and the wall, making sure that they are well
seated.
q Fix the lower part laterally to the hood body us-
ing the 2 screws 12c supplied.
���
�
���
���
�����
���
���
���