Installation - HIKVISION DS-2CE11H0T-PIRLP User Manual

Keep the camera away from liquid while in use for

non-water-proof device.
While in delivery, the camera shall be packed in its

original packing, or packing of the same texture.
Mark Description
Mark
1 Introduction
1.1 Product Features
The main features are as follows:
High performance CMOS sensor

IR cut filter with auto switch

OSD menu with configurable parameters

Auto white balance

Internal synchronization

SMART IR mode

Visible alarm

PIR detection

3-axis adjustment

Alarm linkage with DVR

1.2 Overview
This manual applies to two types of the bullet camera.
The overviews of each type are shown in the figures
below.
1.2.1 Overview of Type I Camera
Lens
White Light
Source
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type II Camera
Lens
Figure 1-2 Overview of Type II Camera Installation

2 Installation

Before you start
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Make sure that all the related equipment is power-off

during the installation.
Table 0-1 Mark Description
Description
DC Voltage
PIR
White Light Source
Video Cable
Bracket
Main Body
Bracket
Main Body
PIR
(TVI)
Power Cord
Video Cable
(TVI)
Power Cord
12 VDC