LG AS60GDPV0 Owner's Manual page 26

Checking Air Quality on the Sta-
tus Panel
You may check the overall air quality, dust
concentration, and smell concentration on
the status panel.
• Overall air quality: You can check the
color (overall air quality) on the
status panel to determine the overall air
quality.
• Dust concentration: You can check the
dust concentration by looking at the dust
concentration value and the particle size
indicator color. It shows the worst status
among the PM 10 (fine) / PM 2.5 (ultra-fine)
/ PM 1.0 (super ultra-fine dust).
– If the dust concentrations of all
categories are 'good', the concentration
of the 'PM 10' is displayed.
– If it is worse than 'moderate', the
color and concentration of the dust
with the highest contamination level
are displayed. If they share the same
contamination level, the contamination
level is displayed according to the
following order: PM 1.0, PM 2.5 and
PM 10.
• Smell concentration: You can check
the color (smell concentration) on
the status panel to determine the smell
concentration.
[example of the Display Showing Air
Quality]
Overall air quality
Dust particle
size and
concentration
color
Dust concentration
26
The above picture displays PM10/PM2.5/
PM1.0, meaning that the concentration of
super ultra-fine dust is higher than those of
fine dust and ultra-fine dust.
while the color of the dust particle size
is solely determined based on the dust
concentration and the color of the
concentration) is solely determined based
on the smell concentration, the color of the
based on the worse cause between the dust
and smell.
If the smell is 'normal' and the PM 1.0 (super
ultra-fine dust) concentration is 50 μg/m
which is 'unhealthy', the overall air quality is
displayed in orange as the worst cause is the
dust. On the other hand, if the smell is 'very
strong', the overall air quality is displayed in red
because the smell becomes the worst cause.
Checking the Dust
Concentration
You can check the airborne dust
concentration by its particle size.
Press the indicator button during the
operation.
• whenever you press the button, the
• The concentration of the selected dust
Smell
concentration
color
(overall air quality) is determined
display changes in the following order:
PM10 → PM2.5 → PM1.0.
particle is displayed for about 10 seconds.
(smell
,
3