Maintenance; Technical Data - GEHA Home & Office X6CD Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 8
GB
3.
Set the switch to „REV" position and the machine is ready for cutting CD/
DVDs; put the CD/DVD vertically into the feeder slot; when cutting is finished,
set the slide switch to „OFF" position.
4.
For a long machine life and for a continuous good shredding function, please
observe the maximum number of sheets per shredding process; shred only
one CD/DVD or credit card at a time.
5.
Continuous use of the machine for a prolonged period of time may cause it to
overheat and stop working. It will resume shredding after cooling down.
6.
Please do not put clips, adhesive paper, adhesive tapes, or clothes into the
paper feeder slot to avoid damaging the blades or lowering the shredding
performance.
7.
Pull the plug before emptying the paper bin or when not using the machine for
a prolonged period of time.

MAINTENANCE

IMPORTANT: Pull the main power plug from the socket before carrying out
any maintenance tasks on the file shredder!
When the waste paper container is full, shredded material can be pushed
upwards into the cutting mechanism. Make sure to empty the waste paper
container before it is filled completely.
Clean the exterior of the file shredder with a moist cloth. Ensure that the cloth
is kept well away from the paper feed. This cleaning step is suitable only for
the exterior of the device. The exterior of the device is made of plastic. That is
why no solvents like benzene or benzole, or any organic solvents (e.g. thinner)
may be used to clean the exterior of the device. Never clean the device with a
stain remover - this may cause the casing to fade, crack, dissolve or graze.
CAUTION: Make sure that no water gets into the device while cleaning the casing.

TECHNICAL DATA

Model:
Cut type:
Cut size:
Cutting capacity:
Cutting speed:
In-feed width:
Input voltage:
Power consumption:
Noise level:
Dimensions:
Waste paper container – volume: 13L / 0,8L CD/DVD waste
Operating cycle:
Net weight:
10
Shredder Home & Office X6 CD
Particles Cut
5 x 35 mm (Paper & Credit card) / 3 pieces CD/DVD
6 sheets (DIN A4/80g/m²); 1 CD/DVD; 1 credit card
2.25m/Min
220 mm / 123 mm for CD/DVD
230 VAC / 50Hz
280W/1.4 A
≤72dB
315 x195 x 322 mm
2 min. ON / 40 min. OFF
3,26 kg

Advertisement

Table of Contents
loading

Table of Contents