Marking Desired Scenes - Toshiba SD-37VESE Owner's Manual

Marking desired scenes

The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
Marking the scenes (DVD/VCD)
1
Press MARKER during playback.
2 Select the blank Marker using C or D.
Then press ENTER at the desired scene.
• Repeat this procedure to set the
other 2 scenes.
3 Press MARKER to clear this display.
Notes:
• Some discs may not work with the marking
operation.
• The marking is cancelled when you open the disc
tray or turn the power off.
• Some subtitles recorded around the marker may fail
to appear.
• In case of Video CD with PBC, Marker function is
prohibited.
42
2J50301A [EN] P42-45
Marker 1
Marker 2
Marker 3
Marker 1 00 27 54
Marker 2
Marker 3
42
Returning to the scenes (DVD/VCD)
1
Press MARKER during playback or stop mode.
2 Press C or D to select the Marker 1-3.
Press ENTER.
3
Playback starts from the marked
scene.
To cancel the Marker
Follow the above steps 1~2, then press CLEAR.
3/22/06, 8:11 PM
Marker 1
00 27 54
Marker 2 01
16 25
Marker 3 02
08 31
Marker 1
00 27 54
Marker 2 01
16 25
Marker 3 02
08 31