Table of Contents
Advertisement
Cassette tape playback
Notes:
• This VCR selects the playback tape
speed SP or LP automatically.
• The Cassette tape and DVD disc can
be played back simultaneously. If you
press VCR or DVD, the tape playback
and DVD playback alternate with each
other on the screen.
24
2J50301A [EN] P23-28
Preparation:
• Turn ON the TV and set to the AV input mode.
• Press VCR to select the VCR mode. (The VCR indicator will light.)
1
Load a pre-recorded tape
(When loading a cassette tape
without the erase prevention
tab, playback will start auto-
matically).
2
To start playback
Press PLAY.
Playback will start.
To stop playback
Press STOP.
To rewind the tape or forward it rapidly
Stop the playback or recording with STOP.
To rewind the tape:
Press REV.
To stop the tape-winding, press STOP. To switch to playback directly
(without STOP), press PLAY.
Forward/Reverse picture search mode
When the tape is being winded, you can switch to picture search
mode (see page 25). To do this, press REV or FWD and hold it down.
The unit will resume the tape winding as soon as the button is
released.
NTSC video cassette playback
When using a pre-recorded NTSC video cassette tape, the connected
TV must operate with a 60 Hz vertical frequency. Otherwise, the on-
screen picture will be affected by vertical rolling. Even if your VCR is
capable of processing NTSC video signals, the picture may be
shortened vertically (appearance of black bars at the top and at the
bottom of the TV screen). The dubbing of a NTSC video cassette tape
to a standard PAL VCR is impossible.
24
VCR
VCR
To forward the tape:
Press FWD.
3/22/06, 8:10 PM
Advertisement
Table of Contents
