Table of Contents
Advertisement
When you try to connect video recorder or Video camera to the recording DVD/VCR with audio/video
cables, make sure the power of both units have been turned off.
Connect the recording DVD/VCR with the TV. Therefore, you can watch what the recording DVD/VCR is
recording.
1
Load a blank cassette tape with the erase prevention
tab intact into the recording DVD/VCR. Load the
previously recorded cassette tape into the playback
VCR or a video camera.
2
Use AUX or CH +/– of the recording DVD/VCR to
select the "L1", "L2" or "L3" instead of the preset
channel.
L1 = RGB OUT/Composite IN/OUT Scart Socket
L2 = VCR/DECODER Scart Socket
L3 = Front AV jacks
Connection with second Video recorder or Video camera
Playback unit
To Video Output
Recording DVD/VCR
To Audio (R) Input
To Video Input
To Audio (L) Input
Press AUX on the recording DVD/VCR repeatedly until "L3" appears.
Duplicating a disc material onto a video tape
You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVD/VCR only.
If the DVD disc has a Copy-guard feature, the duplicating is not possible. A symbol mark "
appear on the screen for approx. 4 seconds. See page 38 for more information about the DVD playback.
Preparation:
• Load a cassette tape with the erase prevention tab
intact.
• Select the tape speed in the VCR mode. (see page
29)
• Load a disc you wish to duplicate.
1
Press DVD to select the DVD mode. (The DVD indi-
cator will light)
2
Press PLAY to start the disc playback.
* Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may
infringe the rights of copyright owners and be contrary to copyright laws.
2J50301A [EN] P29-37
8+4
OR
To Audio (R) Output
To Audio (L) Output
37
Duplicating a video tape
3
Press REC/OTR and then PAUSE/STEP on the
Recording DVD/VCR.
4
Press PLAY-button and then PAUSE/STEP-button
on the Playback unit. Now you can see the still
picture of the scene that you wish to duplicate.
5
Press PLAY-button on the Playback unit and REC/
OTR on the Recording DVD/VCR simultaneously to
start the duplicating.
Note:
Before starting the duplicating process, select the proper
tape speed using SP/LP. For a pre-recorded tape, the
correct tape speed will be set automatically during
playback.
Playback on camera
To AV jack
Audio/Video cables (not supplied)
3
During disc playback, press REC/OTR.
Notes:
• You can set the duplicating time using the OTR-
function. At step 3 above, press REC/OTR repeatedly
until the desired duplicating time appears on the
screen. (see page 31)
• Only non-protected PAL discs can be dubbed to video
tape.
3/22/06, 10:48 PM
" will
37
Advertisement
Table of Contents
