Temporary cancel the rating level by DVD disc
Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set.
It is up to you to decide whether to cancel the rating level or not.
1
Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit (see page 38).
2
If the DVD disc has been designed to
temporarily cancel the Rating level, the
screen which follows the "Reading" screen
will change, depending on which disc is
played. If you select "YES" with the ENTER
key, password input screen will then
appear.
3
Enter the password with Number buttons (0–
9). Then press ENTER.
To exit from the entry, press
RETURN.
4
Playback will commence if the entered
password was correct.
2J50301A [EN] P59-60
Enter Password
59
Note:
This temporary cancellation of rating level will be kept
until the disc is ejected.
When the disc is ejected, the original rating level will
be set again automatically.
3/22/06, 8:12 PM
59