Advanced playback
Marking desired scenes
The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
Marking the scenes
DVD
VCD
1
Press MARKER during playback.
2
Select the blank Marker using C or D.
Then press ENTER at the desired scene.
• Repeat this procedure to set
the other 2 scenes.
3
Press MARKER to remove this display.
Notes:
•
Some discs may not work with the marking operation.
•
The marking is canceled when you open the disc tray or turn
the power off.
•
Some subtitles recorded around the marker may fail to
appear.
22
2F10101A [E] P21-24
22
Returning to the scenes
DVD
VCD
1
Press MARKER during playback or stop mode.
2
Press C or D to select the Marker 1-3.
Press ENTER.
3
Playback starts from the marked
scene.
To cancel the Marker
Follow the above steps 1~2, then press CLEAR.
1/18/05, 6:37 PM
ENTER
C/D
CLEAR
MARKER