Recording A Tv Program - Toshiba SD-37VESE Owner's Manual

Notes:
• Since the DVD/VCR has a built-in TV
tuner, the TV set may be turned off
when recording. The TV set may only
be used to check for accurate program
adjustments or to monitor recordings.
• If you wish to watch the DVD playback
during the recording on VCR, press
DVD to change to DVD mode and per-
form the DVD playback (see page 38).
2J50301A [EN] P29-37
Preparation
• Turn ON the TV and set to the AV input mode.
• Press VCR to select the VCR mode. (The VCR indicator will
light.)
1
Load a blank cassette tape with the erase
prevention tab intact. (The DVD/VCR will auto-
matically turn on.)
2
Select the program(e.g.29) you want to record with CH +/– or
Number buttons (0-9).
1~9 :
10~80 : e.g. 29 = press "2" and "9".
3
If a recording in Long Play mode is
intended, press SP/LP to display
"LP".
4
Press REC/OTR to start recording.
If the erase prevention tab is removed, the tape will eject when REC/
OTR is pressed for recording. (see page 23)
To Stop Recording
Press STOP.
To Stop Recording Temporarily
To stop a recording for a short
period of time, press PAUSE/
STEP. Press this button again if
you want to resume the recording.
Attention:
A safety circuit turns the pause mode off automatically after 5
minutes, and the DVD/VCR will stop the recording mode.
29

Recording a TV program

8+4
e.g. 5 = press "5"
VCR
REC
VCR
VCR
REC
3/22/06, 8:11 PM
VCR
00:00:00 LP
CH 29
INDEX
29