Print Settings - Canon Pixma E4570 Online Manual

Print settings

Select this menu from Device settings in Setup menu.
• Prevent abrasion •
Use this setting only if the print surface becomes smudged.
Important
• Be sure to set this back to OFF after printing since it may result in lower printing speed or lower •
print quality.
• • Amount of extension
Selects the amount of image that extends off the paper when printing in borderless (full).
When performing Borderless Printing, slight cropping may occur at the edges since the printed image is
enlarged to fill the whole page. You can change the width to be cropped from the borders of the original
image as needed.
Important
• Settings will become ineffective in the following situations: •
Printing from a standard form.
Note
• When performing settings from application software or the printer driver, these settings will be •
prioritized.
• • If printouts contain margins even though you are printing in Borderless, specifying Amount: Large
for this setting may help solve the problem.
• • Auto photo fix set.
Selecting ON will prioritize the printing of the Exif information in the image.
• Prevent double-feed •
Select ON to prevent double-feed of plain paper.
Important
• • Be sure to set this back to OFF after printing since it may result in lower printing speed.
186