Advertisement
OPERATION MANUAL
Interface: Please link the applicable
interface cable to the PC and the Cradle
POWER: plug in via the Cradle (First link
the interface cable to the PC and the Cradle,
then switch on the Cradle)
Application: Receiving the code by using
the subsidiary application pattern
terminating machine (38400-N-8-1).
Connection: After the Scanner Scan the
code on the Test Chart, it will then
implement the connection of the Cradle.
In the meantime,
Scanner: The yellow light glitter means
on line. After connected, it will beep three
times. Afterwards, it will deliver the code to
the PC. If the transmission failed, the red
light will be on and beep twice meaning
failed.
Cradle : Before linking with the Scanner,
the yellow light in on. After linked, the light
will turn green.
92
Advertisement
