Firmware Screen; Figure 17-7 Firmware Upgrade - ZyXEL Communications ZyXEL Prestige 792H User Manual
G.shdsl router with four-port switch
Hide thumbs
Also See for ZyXEL Prestige 792H:
- User manual (437 pages) ,
- Specifications (2 pages) ,
- Compact manual (27 pages)
Table of Contents
Advertisement
Prestige 792H G.SHDSL Router
"Start to reset xDSL...
Reset xDSL Line Successfully!"
Back
Click this button to go back to the main Diagnostic screen.
17.5 Firmware Screen
Find firmware at
www.zyxel.com
extension, e.g., "Prestige.bin". The upload process uses HTTP (Hypertext Transfer Protocol) and may take up
to two minutes. After a successful upload, the system will reboot. See the Firmware and Configuration File
Maintenance chapter in the parts that document the SMT for upgrading firmware using FTP/TFTP
commands.
Only use firmware for your Prestige's specific model. Refer to the label on the
Click Firmware to open the following screen. Follow the instructions in this screen to upload firmware to
your Prestige.
17-10
Table 17-5 Diagnostic DSL Line
in a file that (usually) uses the system model name with a "*.bin"
bottom of your Prestige.
Figure 17-7 Firmware Upgrade
Maintenance
Advertisement
Table of Contents
Troubleshooting
