2 Hardware
2.1 Rear Panel Connections
LABEL
1.
DSL
Connect to a telephone jack using the included telephone wire.
2.
LAN
Connect to a computer/external hub using an Ethernet cable.
1/DMZ..
4
3.
POWER
Connect to a power source using only the included power adaptor for
12V DC
your region (see your User's Guide).
After you've made the connections, connect the power adaptor to a power supply and
push in the power button to turn on the Prestige.
The PWR/SYS LED blinks while performing system testing and then turns steady on if
the testing is successful. A LAN LED turns on if a LAN port is properly connected.
Prestige 662HW Series Compact Guide
Figure 1 Rear Panel Hardware Connections
Table 1 Rear Panel Description
DESCRIPTION
4