ZyXEL Communications P-660HW-TX Support Notes page 68

The SNMP related settings in P-660HW-Tx v2 are configured in Web
Configurator, Advanced Setup, Advanced -> Remote MGNT -> SNMP The
following steps describe a simple setup procedure for configuring all SNMP
settings.
Key Settings:
Option Descriptions
Enter the correct Get Community. This Get Community must match the
Get
'Get-' and 'GetNext' community requested from the NMS. The default is
Community
'public'.
Set
Enter the correct Set Community. This Set Community must match the
Community
'Set-community requested from the NMS. The default is 'public'.
Enter the IP address of the NMS. The P-660HW-Tx v2 will only respond
Trusted
to SNMP messages coming from this IP address. If 0.0.0.0 is entered,
Host
the P-660HW-Tx v2 will respond to all NMS managers.
Trap
Enter the community name in each sent trap to the NMS. This Trap
Community Community must match what the NMS is expecting. The default is
All contents copyright © 2006 ZyXEL Communications Corporation.
P-660HW-Tx v2 Series Support Notes
67