Table of Contents
Advertisement
• Setup the P-660HW-Tx v2 as a DHCP Relay
We could set the P-660HW-Tx v2 as a DHCP Relay by the following command
in CLI:
Ip dhcp enif0 mode
Ip dhcp enif0 relay server
4. SUA Notes
Tested SUA/NAT Applications (e.g., Cu-SeeMe, ICQ, NetMeeting)
Introduction
Generally, SUA makes your LAN appear as a single machine to the outside
world. LAN users are invisible to outside users. However, some applications
such as Cu-SeeMe, and ICQ will need to connect to the local user behind the
P-660HW-Tx v2. In such case, a SUA server must be configured to forward the
incoming packets to the true destination behind SUA. After the required server
are configured in Web Configurator, Advanced Setup, Network -> NAT ->
Port Forwarding, the internal server or client applications can be accessed by
using the P-660HW-Tx v2's WAN IP Address.
SUA Supporting Table
The following are the required Web Configurator, Advanced Setup, Network
-> NAT -> Port Forwarding for the various applications running SUA mode.
ZyXEL SUA Supporting Table
Application
HTTP
FTP
All contents copyright © 2006 ZyXEL Communications Corporation.
relay
[Server IP Address]
1
Required Settings in Port Forwarding
Port/IP
Outgoing Connection
None
None
P-660HW-Tx v2 Series Support Notes
Incoming
Connection
80/client IP
21/client IP
42
Advertisement
Table of Contents
