Using The Dynamic Dns (Ddns) - ZyXEL Communications P-660HW-TX Support Notes

802.11g wireless adsl2+ 4-port gateway
Hide thumbs Also See for P-660HW-TX:
Table of Contents

Advertisement

P-660HW-Tx v2 Series Support Notes
One rule configured for using Many-to-Many No Overload mapping type is
shown below.
We can also do this by configure threeOne-to-One mapping type rules.

6. Using the Dynamic DNS (DDNS)

• What is DDNS?
The DDNS service, an IP Registry provides a public central database where
information such as email addresses, hostnames, IPs etc. can be stored and
retrieved. This solves the problems if your DNS server uses an IP associated
with dynamic IPs.
Without DDNS, we always tell the users to use the WAN IP of the P-660HW-Tx
v2 to access the internal server. It is inconvenient for the users if this IP is
dynamic. With DDNS supported by the P-660HW-Tx v2, you apply a DNS
name (e.g., www.zyxel.com.tw) for your server (e.g., Web server) from a
DDNS server. The outside users can always access the web server using the
www.zyxel.com.tw regardless of the WAN IP of the P-660HW-Tx v2.
63
All contents copyright © 2006 ZyXEL Communications Corporation.

Advertisement

Table of Contents
loading

Table of Contents