Adjusting The Speaker Volume - Sharp LL-T15S1 Operation Manual

Adjusting the screen display and speaker volume
MENU 4: MODE SELECT
M O D E S E L E C T
[ O D S H - P O S I T I O N
O SD V - P O S I T I O N
4 0 0 L I E N S
S CAL I NG
1 0 2 4 x 7 6 8
V : 6 0 H z H
Notes:
- Depending on the resolution of the input signal, even
if menu options can be selected, the display may not
change.
- To choose a menu option:
- When adjustment complete: MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to the left
and right. ( buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up and
down. ( buttons)
400 LINES (degree of resolution)
You can specify the horizontal resolution of a 400-line
screen when using US text, etc.
( buttons)
640 640 X 400 dot mode
720 720 X 400 dot mode (US text etc.)
Note:
- As the resolution input for other than 400 lines is
done automatically, there is no need to set it.
SCALING (Level of scaling)
The sharpness of the image can be adjusted.
( buttons)
Note:
- When the display mode is set to less than
1024 x 768 pixels, the display is enlarged to cover
the whole screen (i.e. the side ratio of the display
may change).
- Display modes of 1024 X 768 pixels cannot be
changed.
]
6 4 0 7 2 0
L V E EL 1 L VEL 2
E
: 4 8 H z k
SELECT button

Adjusting the speaker volume

Without the OSD menu and backlight adjustment bar
being displayed, press the
volume.
19
buttons to adjust the