Product Description - Sharp LL-T17D3 Operation Manual

8
7
1 2
1. INPUT button ........................... To switch between the signal's input terminals.
2. MENU button ............................ This button is used to pop-up, select and close the OSD (On Screen
3. / MODE button ..................... When the OSD Menu is displayed:
4. buttons ............................. When the OSD Menu is displayed:
5. Power button ............................ Pressing this button turns the power on. (After turning the power on, it
6. Power LED ............................... This LED is lit green when in use and orange when in power-saving
7. Speakers .................................. Audio entering via the monitor and the external device connected to
8. Headphone terminal ................ Headphones (commercially available) can be connected here.
9. Audio input terminal ................. A computer's audio output terminal can be connected here. The audio
10. Power terminal ......................... The AC adapter is connected here.
11. DVI-I input terminal .................. The computer's digital RGB output terminal or analog RGB output
12. Analog RGB input terminal ...... The analog signal cable is connected here.The analog signal cable
13. Security lock anchor ................ By connecting a security lock (commercially available) to the security
14. Ventilation openings ................ Note: Never block the ventilation openings as this may lead to
15. Lock disable button .................. This button is used when folding back the display section.

Product description

7
3 4 5 6
Display) Menu.
This button is used to select menu options.
When the OSD Menu is not displayed:
This button is used to set COLOR MODE.
These buttons are used to select an option or adjust the value of the
selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness and speaker
volume.
may take a little time before the screen displays.)
Press the button again to turn the power off.
mode.
the monitor can be heard.
cable included should be used.
terminal can be connected here.
Separately sold cables are necessary for connection. (p.8)
For a digital signal input: It can be connected to a computer with a DVI-
compatible output terminal (DVI-D24 pin or DVI-I29 pin) and which has
SXGA output ability. Depending on the computer to be connected,
correct display may or may not be possible.
included should be used.
lock anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.
overheating inside the monitor and result in malfunction.
15 9 10 11
9
14
12 13