Sharp LL-T17D3 Operation Manual page 21

Adjusting the screen display
MODE SELECT Menu
MODE SELECT
OS D H-POS I T I ON
OS D V -POS I T I ON
S C AL I NG
L A NGUAGE
I N P U T - 2 D I G I T A L
1 2 8 0 x 1 0 2 4 V : 6 0 H z
Notes:
- Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.
- To choose a menu option:
- To complete adjustment: MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD Menu can be moved to the
left and right. ( buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD Menu can be moved up
and down. ( buttons)
SCALING (Level of scaling)
The sharpness of the image can be adjusted. (
buttons)
Note:
- When the display mode is set to less than
1280 x 1024 pixels, the display is enlarged to
cover the whole screen (i.e. the side ratio of the
display may change).
LANGUAGE
You can choose the language used in OSD Menu.
1. Press the button.
The Language Selection Menu will be displayed
on the screen.
2. Use the / MODE button to choose a language.
3. Press the MENU button.
Language Selection Menu will disappear.
3
H : 6 4 . 0 k H z
/ MODE button
21
(When using a digital signal)