Connect the power supply cable of suitable
dimensions before securing the power supply
Assemble the runners on the sides of the
machine (using the screws supplied) as shown in
Fasten the telescopic runner supports (RH and
LH) using three wood screws (fig.2) and taking
care to follow the measurements shown in fig.2.
Make a slot in the bottom of the open
compartment following the measurements given
If the compartment does not have a shelf for the
machine to rest on, assemble the machine fixing
bracket (ref.29) as shown in fig.4. Place screw 1
in the slot of the bracket and adjust the position
before locking in place using screw 2.
Fasten the power supply unit (fig.3) to the back
of the appliance in the top left-hand corner using
two wood screws as shown in fig.2.