Setting Up The Reader; Configure The Base Station - Datalogic Gryphon I GM4102 Quick Reference Manual

Setting Up the Reader

Follow the steps below to connect and get your reader up
and communicating with its host.
1. Configure the Base Station starting on this
page.
2. Charge the Batteries (see page 8).
3. Link to the Base Station (see page 13).
4. Select the Interface Type (see page 15).
5. Configure other settings if desired starting on
page 28 (optional, depends on settings needed).

Configure the Base Station

The base charger/station may be configured in desk
application to hold the reader in two different positions,
either a horizontal or standing position, in order to provide
the most comfortable use depending on needs.
Quick Reference Guide
Gryphon™ I GM4102
Quick Reference Guide
Standing
Horizontal
1