Datalogic Gryphon I GM4102 Quick Reference Manual page 16

Configure the Base Station
Host Connection — Verify before connection that the
reader's cable type is compatible with your host equip-
ment. Most connections plug directly into the host device
as shown in Figure 4 on page 6. Keyboard Wedge interface
cables have a 'Y' connection where its female end mates
with the male end of the cable from the keyboard and the
remaining end at the keyboard port on the terminal/PC.
Figure 4. Connecting to the Host
or...
or...
or...
Power Connection — Plug the AC Adapter in to an approved
AC wall socket with the cable facing downwards (as
shown in Figure 1) to prevent undue strain on the socket.
Disconnecting the Cable — To detach the cable, insert a
paper clip or similar object into the hole on the base, as
shown in Figure 5.
Figure 5. Disconnecting the Cable
Insert
Paper Clip
6 Gryphon™ I GM4102