Tuning Operations - Yamaha RX-V2090 Owner's Manual

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC
TUNING) is possible. However, if signals of the station you want to select are weak, you must tune to it manually
(MANUAL TUNING).
AUTOMATIC TUNING
1
Select the reception band (FM or AM) while watching
the display.
FM/AM
2
TUNING
MODE
3
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
4
If the station where tuning search stops is not the desired
one, press again.
• If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to the
MANUAL TUNING method.
Display information
AM
FM
22

TUNING OPERATIONS

2,
or
AM FM
AUTO
TUNING
DOWN TUNING UP
DOWN TUNING UP
1
2
kHz
MHz
STEREO
3
0 20 40 60 l00
1,
3,4,
MANUAL TUNING
Select the reception band (FM or AM) while watching
the display.
FM/AM
TUNING
MODE
Tune to a desired station manually.
• To continue tuning search, press and hold the button.
Note:
If you tune to an FM station manually, it is received in
monaural mode automatically to increase the signal quality.
1 Displays the band and frequency of the received
station.
2 Lights up when an FM stereo broadcast is received
in stereo.
3 Indicates the signal level of the received station.
or
AM FM
"AUTO TUNING" goes off.
DOWN TUNING UP