Tuning Operations - Yamaha RX-V670 Owner's Manual

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
AUTOMATIC TUNING
1
Select the reception band (FM or AM) while watching
the display.
FM/AM
2
TUNING MODE
AUTO/MAN'L MONO
3
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
4
If the station where tuning search stopped is not the
desired one, follow step 3 again.
* If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to
the MANUAL TUNING method.
Display information
1
FM
16

TUNING OPERATIONS

or
AM AM
AM
kHZ
FM
MHz
NCERT
MEMORY AUTO TUNING
HALL
MHz
60 80 100
0 40
STEREO
3
3, 4, 3 3 2, 2 2
MANUAL TUNING
1 1
Select the reception band (FM or AM) while watching
the display.
FM/AM
2 2
TUNING MODE
AUTO/MAN'L MONO
3 3
Tune to the desired station manually.
* To continue tuning search, press and hold the button.
Note
If you tune to a FM station manually, it is received in monaural
mode automatically to increase the signal quality.
Displays the band and frequency of the received station.
Indicates the signal level of the received station.
Illuminates when an FM stereo broadcast with sufficient
signal strength is received.
2
1, 1 1
or
AM AM
"AUTO TUNING"
goes out.