Troubleshooting Guide - Yamaha RX-V2090 Owner's Manual

To clear a learned function
1
Set to the " " position.
USER
YPC
2
Press and hold the CLEAR button using the point of a
mechanical pencil, etc.
3
Press and hold the key where the learned function to be
deleted is until the indicator flashes 3 times.
• To clear two or more functions, repeat step 2 and 3.
Note:
If a key is not pressed soon after the CLEAR button is
pressed, this unit will automatically return to the status
that was in effect before the CLEAR button was pressed.

Troubleshooting guide

SYMPTOM
The remote control transmitter does not work.
Learning cannot be made successfully. (The
TRANSMIT/LEARN indicator does not light up or
flash.)
USER
LEARN
CLEAR
TRANSMIT
/LEARN
The batteries of this remote control transmitter are
weak.
The internal microcomputer "freezes".
The batteries of this remote control transmitter
and/or the other remote control transmitter are
weak.
The distance between the two remote control
transmitters is too long or too short.
The signal coding or modulation of the other
remote control transmitter is not compatible with
this remote control transmitter.
Memory capacity is full.
To clear all learned functions
1
Set to the "
LEARN" position.
2
Press and hold the CLEAR button using the point of a
mechanical pencil, etc.
3
Press and hold any key until the indicator flashes 7 times
CAUSE
Replace the batteries with new ones and press the
RESET button on the remote control transmitter.
Replace the batteries (and press the RESET button
for this remote control transmitter).
Place the remote control transmitters with the
proper distance.
Learning is not possible.
Further learning is not possible without deleting
unnecessary commands.
Press the RESET button on the remote control
transmitter.
USER
YPC LEARN
CLEAR
TRANSMIT
/LEARN
REMEDY
37