Tuning Operations - Yamaha RX-495 Owner's Manual

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
AUTOMATIC TUNING
1
Select the reception band (FM or AM) confirming it on
the display.
FM/AM
2
TUNING MODE
AUTO/MAN'L MONO
AUTO TUNING
3
DOWN
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
* If the station where tuning search stops is not the desired
one, press again.
* If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to
the MANUAL TUNING method.

TUNING OPERATIONS

2
FM or AM
TUNING
UP
1 3
MANUAL TUNING
1
Select the reception band (FM or AM) confirming it on
the display.
FM/AM
2
TUNING MODE
AUTO/MAN'L MONO
3
Tune to a desired station manually.
* To continue tuning search, press and hold the button.
Note
If you tune to an FM station manually, it is received in
monaural mode automatically to increase the signal quality.
or
FM AM
Turn "AUTO TUNING"
off.
TUNING
DOWN UP
17