Recording - Yamaha HTR-5920 Owner's Manual

RECORDING

Recording adjustments and other operations are performed from the recording components. Refer to the operating
instructions for those components.
STANDBY
/ON
PRESET/TUNING FM/AM A/B/C/D/E
EDIT
STEREO l PROGRAM
PHONES
EFFECT
TONE CONTROL BASS/TREBLE
STANDBY
CD MD/CD-R
DVD DTV/CBL
P1
P5
A/B/C/D/E
1
Turn on all the connected components.
2
Press INPUT l / h on the front panel (or one
of the input selector buttons on the remote
control) to select the source component you
want to record from.
INPUT
or
Front panel
3
Start playback on the selected source
component or select a broadcast station.
4
Start recording on the recording component.
y
Do a test recording before you start an actual recording.
30
RECORDING
VOLUME
l h
PRESET/TUNING MEMORY TUNING MODE
NEXT SET MENU MAN'L/AUTO FM AUTO/MAN'L
h l INPUT h
INPUT MODE
2
POWER
TUNER SLEEP
2
VCR V-AUX
TUNER
P2 P3 P4
P6 P7 P8
PRESET
CD MD/CD-R TUNER
DVD DTV/CBL VCR V-AUX
Remote control
Notes
• When this unit is set to the standby mode, you cannot record
between other components connected to this unit.
• The setting of frequency response levels (page 21), volume,
speaker levels (page 32) and the surround mode do not affect
recorded material.
• A given input source is not output on the same OUT channel.
(For example, the signal input at VCR IN is not output at VCR
OUT.)
• Check the copyright laws in your country to record from CDs,
radio, etc. Recording of copyrighted material may infringe
copyright laws.
If you play back a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.