Yamaha HTR-5920 Owner's Manual page 27

Adjusting the surround parameters of
PLII MUSIC
1 While playing a source with PLII MUSIC, press
/ on the remote control to select "PANO"
(PANORAMA), "DIMEN" (DIMENSION) or "CT
WID" (CT WIDTH).
2 Press / on the remote control to adjust the
parameters.
PANO (PANORAMA)
Sends stereo signals to the surround speakers as well as
the front speakers for a wraparound effect.
Choices: OFF, ON
Initial setting: OFF
DIMEN (DIMENSION)
Adjusts the surround sound either towards the front or
towards the rear.
Control range: –3 (towards the rear) to +3 (towards the front)
Initial setting: STD (standard)
CT WID (CT WIDTH)
Adjusts the center image from all three front speakers to
varying degrees. A larger value adjusts the center image
towards the front left and right speakers.
Control range: 0 (center channel sound is output only from the
center speaker) to 7 (center channel sound is
output only from the front left and right speakers)
Initial setting: 3
Enjoying high fidelity stereo sound
Press STEREO on the front panel (or press
STEREO on the remote control) to select
"STEREO".
The sound effects are turned off and no sound is output
from the center speaker or surround speakers.
Press STEREO on the front panel (or STEREO on the
remote control) again to turn off the sound effects.
STEREO
or
EFFECT
Front panel
Notes
• If you turn off the sound effects while this unit is reproducing
sound from a Dolby Digital or DTS signal, the dynamic range
of the signal is automatically compressed and this unit mixes
the sounds of the center and surround speaker channels and
outputs them from the front speakers.
• The volume may be greatly reduced when you turn off the
sound effects. In this case, turn on the sound effects.
Night listening mode
The night listening mode is designed to improve
listenability at lower volumes or at night.
Press NIGHT on the remote control repeatedly to
select "NIGHT ON".
The NIGHT indicator in the front panel display lights up.
Select "NIGHT OFF" to turn off the night listening mode.
NIGHT
Notes
• You can use the night listening mode only with the Dolby
Digital sources.
• If you select the "STEREO" mode or if you connect the
headphones while multi-channel Dolby Digital source is
reproduced, the night listening mode is not available.
• The night listening mode may vary in effectiveness depending
on the input source and surround sound settings you use.
PLAYBACK
STEREO
Remote control
23