Information On Jacks And Cable Plugs - Yamaha HTR-5920 Owner's Manual

Information on jacks and cable plugs

Audio jacks and cable plugs
AUDIO
L L
(White)
R R
(Red)
DIGITAL INPUT
COAXIAL
C
(Orange)
OPTICAL
O
Audio jacks
This unit has three types of audio jacks (analog audio,
digital audio coaxial, and digital audio optical).
Connection depends on the availability of audio jacks on
your other components.
AUDIO jacks
For conventional analog audio signals transmitted via left
and right analog audio cables. Connect red plugs to the
right jacks and white plugs to the left jacks.
DIGITAL AUDIO COAXIAL jack
For digital audio signals transmitted via a coaxial digital
audio cable.
DIGITAL AUDIO OPTICAL jack
For digital audio signals transmitted via an optical digital
audio cable.
Notes
• You can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. All digital input jacks are compatible with
96 kHz sampling digital signals.
• This unit handles digital and analog signals independently. Thus
audio signals input at the analog jacks are output only at the
analog AUDIO OUT jacks.
Left and right analog
audio cable plugs
Coaxial digital audio
cable plug
Optical digital audio
cable plug
Video jacks and cable plugs
COMPONENT VIDEO
Y Y
(Green)
P
P
B
B
(Blue)
P
P
R R
(Red)
VIDEO
V
(Yellow)
Video jacks
This unit has two types of video jacks (composite video,
and component video). Connection depends on the
availability of input jacks on your video monitor.
VIDEO jacks
For conventional composite video signals transmitted via
composite video cables.
COMPONENT VIDEO jacks
For component signals, separated into the luminance (Y)
and chrominance (P , P ) video signals transmitted on
B R
separate wires of component video cables.
Video signal flow for MONITOR OUT
Input
COMPONENT
VIDEO
VIDEO
CONNECTIONS
Component video
cable plugs
Composite video
cable plug
Output
(MONITOR OUT)
13