Manual Preset Tuning - Yamaha HTR-5920 Owner's Manual

Manual preset tuning

You can also store up to 40 stations (8 stations x 5 groups)
manually.
3
STANDBY
/ON
PRESET/TUNING FM/AM A/B/C/D/E
EDIT NEXT
STEREO l PROGRAM h
PHONES
EFFECT
TONE CONTROL BASS/TREBLE
1
Tune into a station.
See page 24 for tuning instructions.
When tuned into a station, the front panel display
shows the frequency of the station received.
2
Press MEMORY on the front panel.
The MEMORY indicator flashes for approximately 5
seconds.
MEMORY
MAN'L/AUTO FM
3
Press A/B/C/D/E on the front panel
repeatedly to select a preset station group (A
to E) while the MEMORY indicator is flashing.
4 2,5
VOLUME
l h
PRESET/TUNING MEMORY TUNING MODE
SET MENU MAN'L/AUTO FM AUTO/MAN'L
l INPUT h
INPUT MODE
AM TUNED
kHz
4
Press PRESET/TUNING l / h on the front
panel to select a preset station number (1 to
8) while the MEMORY indicator is flashing.
Press h to select a higher preset station number.
Press l to select a lower preset station number.
5
Press MEMORY on the front panel while the
MEMORY indicator is flashing.
The station band and frequency appear in the front
panel display with the preset group and number you
have selected.
6
Repeat steps 1 through 5 to store other
stations.
• Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
• The reception mode (stereo or monaural) is stored along with
the station frequency.
FM/AM TUNING
27