Specifications - NEC NC2041L User Manual

6. Appendix

6-6. Specifications

Model name
Projection method
Panel resolution
Light source
Screen sizes
Contrast ratio
Lens adjustment function
Signal input ports (slot)
External Control
Power supply voltage
Input current
Power consumption (Note 2)
Cooling method
Noise level
Installation
Net weight
Dimensions
Environment
(Note 1) The video input slots are empty when the device is shipped. Input ports can be added by mounting option boards, which
are sold separately. (See page 87)
(Note 2) The value is typical.
(Note 3) C1 connection is the case when the AC power to the projector power supply and the light power supply is provided by a
single cable.
C2 connection is the case when the AC power to the projector power supply and the light power supply is provided by sepa-
rate cables.
* Described the certification standard for laser products in "Important Information" of this manual. (See page 2)
* Note that these specifications and design can change without prior notice.
78
NC3541L
3 chip DLP Cinema® method
1.38-inch DC4K chip
4096 x 2160
Laser Diode
Max. 32 m @14ft-L / Screen Gain 2.6 (Depends on setup conditions)
2000:1 with DCI specified color representation
Motorized lens shift (vertical/horizontal), motorized zoom, motorized focus
When shipped from factory: Empty
(for mounting optional components) (Note 1)
RS-232C (D-sub 9pin) x 1
GPIO port (D-sub 37 pin) x 1
Service terminal (stereo mini jack) x 1
3D CTL (D-sub 15 pin) x 1
USB (Type A) x 1
Remote interlock port x 1
Ethernet port (RJ-45) x 1
For C1 connection (Note 3) :
Single phase AC 200V-240V 50/60Hz (projector power supply + light power supply)
For C2 connection (Note 3) :
Single phase AC 200V-240V 50/60Hz (projector power supply)
Single phase AC 200V-240V 50/60Hz (light power supply)
For C1 connection (Note 3)
projector power supply + light power supply: 30.0A
For C2 connection (Note 3)
projector power supply: 4.9A
light power supply: 25.1A
For C1 connection (Note 3)
projector power supply + light power supply: 4885W
For C2 connection (Note 3)
projector power supply: 885W
light power supply: 4000W
Cooling fluid system, Cooling air system
Less than 55 dB
Orientation: Desktop/front, Desktop/rear, Ceiling/front, Ceiling/rear
169 kg (Excluding lens)
697 mm (W) x 1180 mm (D) x 455 mm (H) (Does not including protruding portions, includes foot.)
Operating temperature: 10 to 35°C
Operating humidity: 10 to 85% (non-condensing)
Storage temperature: -10 to 50°C
Storage humidity: 10 to 85% (non-condensing)
Operating altitude: 0 to 2600m/8500 feet