Turning Your Projector Off - NEC NC2041L User Manual

3. Projection of Images (Basic Operation)

3-7. Turning your projector off

1
Press the POWER button on the projector control panel for three seconds or longer.
The light source is turned off, the POWER indicator blinks green, and the STATUS and SYSTEM status indicators blink
orange (cooling state). The fan will continue to rotate while cooling, and the amount of time remaining for cooling is dis-
played on the LCD screen.
When the cooling is finished, the POWER, STATUS, and SYSTEM status indicators light orange (standby state). KEY
LOCK becomes automatically on if no control panel operation takes place in the standby state for 30 seconds by default.
Buttons on the control panel do not function while KEY LOCK is on. (See page 40)
2
After the projector enters the standby state, turn off the projector power switch ([1]), then the
light power switch ([2]).
The POWER, STATUS, and SYSTEM status indicators lit orange and the main power is turned off.
Administrator switch
42
Light power switch
Projector power switch