NEC NC2041L User Manual page 47

6
Press the DOWN button.
The submenu "Model" another rank lower than "System" is displayed.
7
Press the LEFT/RIGHT button to select the submenu "Kernel."
At each press of the LEFT/RIGHT button, the display will cycle as "Model" ←→ "Serial No." ←→ "Kernel" ←→ "U-Boot"
←→ "RFS" ←→ "Main Software" ←→ "Data" ←→ "ICP" ←→ "ICP ConfigFile" ←→ "Slave BIOS" ←→ "Slave Firmware"
←→ "Slave Data" ←→ "Set Ctrl FPGA" ←→ "SSL BIOS" ←→ "SSL Firmware" ←→ "SSL Data" ←→ "SSL FPGA" ←→
"Secure Processor" ←→ "LD Driver1" ←→ "LD Driver2" ←→ "LD Driver3" ←→ "LD Driver4" ←→ "Router" and each
version information is displayed.
8
Press the UP button several times.
At each press of the UP button, the display will return to a menu one level above.
4. Using Menus
47