Table of Contents
Advertisement
6. Appendix
6-2-4. TEMP. indicator
Indicator condition
Blinking light
Red
Steady light
Red
6-2-5. LIGHT indicator
Indicator condition
Off
Steady light
Green
6-2-6. STATUS indicator
Indicator condition
Off
Blinking light
Orange
Green (cycle of 1
second)
(Note 1)
Green (cycle of 2
second)
(Note 2)
Red
(With buzzer)
Red
(Without buzzer)
Steady light
Green
Orange
Red
(Note 1) Repeats 0.5 seconds on → 0.5 seconds off.
(Note 2) Repeats 1.5 seconds on → 0.5 seconds off.
6-2-7. POWER indicator
Indicator condition
Steady light
Blue
Orange
Green
Blinking light
Blue
Green
Green (cycle of
3 second)
(Note 1)
(Note 1) Repeats 2.5 seconds on → 0.5 seconds off.
68
Projector condition
The projector temperature rises close to the operating
temperature limit.
The projector temperature exceeded the operating
temperature.
Projector condition
The light source is off.
The light source is on.
Projector condition
The projector power supply is off.
State from turning the power off to entering standby mode.
The projector is getting ready to turn on.
The douser is closed.
The projector is turned on with light off.
Safety problem, error.
Error with possible image project under certain conditions.
The projector is turned on.
The projector is in standby.
Error at a level with not affect on projection.
Projector condition
While the projector software is starting.
The projector power supply is on, or the projector is in
standby.
The projector is turned on.
While the projector software is starting.
The projector is getting ready to turn on.
State from turning the power off to entering standby mode.
When the sleep timer is activated.
Note
An error message is displayed in
the LCD screen.
Check the content of the error.
An error message is displayed in
the LCD screen.
Check the content of the error.
Note
-
-
Note
-
Wait for a moment.
Wait for a moment.
-
An error message is displayed in
the LCD screen.
Check the content of the error.
An error message is displayed in
the LCD screen.
Check the content of the error.
-
-
An error message is displayed in
the LCD screen.
Check the content of the error.
Note
Wait for a moment.
-
Wait for a moment.
-
Advertisement
Table of Contents
