Table of Contents
Advertisement
Hold down the engine start button and release it as
soon as the desired figure is displayed.
NOTE
To quickly cycle through the selected digit, hold the
start button depressed for longer than two seconds.
Press SET to confirm the first hour digit and to be
able to set the following digit.
4
Repeat the procedure to set the second hour digit
and the first and second minute digits.
Press SET to confirm the time and exit the set
(blinking) mode.
NOTE
The instrument panel has an integrated memory
which retains all the parameters even when the engi-
ne is not running. Except for the clock, which is
reset, all the parameters are retained even when the
battery is disconnected.
OPERATION
- 70 -
4
Advertisement
Table of Contents
