Control Panel Functions
VOLUME Button
INPUT Button
(SOURCE Hot key)
EXIT Button
Power Button &
Power Indicator
To adjust the volume of headphone/Earphone.
MEN U
V OLU ME
When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub.
Exit the OSD(On Screen Display).
Use this button to turn the display on or off.
The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white.
11
50
EXIT