Table of Contents
Advertisement
Control Panel Functions
AUTO Button
INPUT Button
(SOURCE Hot key)
EXIT Button
Power Button &
Power Indicator
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
IPS206T : 1600 x 900
IPS226T : 1920 x 1080
Use this button to select source from input.
When two input signals at least are connected, you can
select the input signal (D-SUB/DVI) you want. When only
one signal is connected, it is automatically detected. The
default setting is D-Sub.
Exit the OSD(On Screen Display).
Use this button to turn the display on or off.
The power indicator stays blue if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking blue.
10
Advertisement
Table of Contents
