Auto Button; Exit Button - LG E2250T-PN User Manual

Control Panel Functions

AUTO Button

INPUT Button
(SOURCE Hot key)

EXIT Button

Power Button &
Power Indicator
Light Sensor
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
E1950T : 1360 x 768
E2050T : 1600 x 900
E2250T : 1920 x 1080
E2350T : 1920 x 1080
Use this button to select source from input.
When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub.
Exit the OSD(On Screen Display).
Use this button to turn the display on or off.
From front view,the power indicator stays purple if the
display is running properly (On Mode). If the display
is in Sleep Mode (Energy Saving), the power indicator
is blinking purple.
This is lens for light sensor detect outside luminance,
when setting AUTO BRIGHT ON.
12