Supplement; Specifications - Yamaha MV12 Owner's Manual

14

Supplement

Supplement

Specifications

I General specifications
Frequency response
(CH MIC INPUT to ST, GROUP OUT/AUX, EFFECT SEND)
Total harmonic distortion
(CH MIC INPUT to ST, GROUP OUT/AUX, EFFECT SEND)
Hum & Noise
(Rs=150Ω, 20Hz—20kHz, INPUT GAIN Control=Max.,
Input Sensitivity=-60dB)
* Measured with 12.7kHz, -6dB/oct. low pass filter.
∞
(Equivalent to 20kHz, - dB/oct. filter.)
Maximum voltage gain
Monaural input gain control
Stereo input gain control
Crosstalk at 1kHz
Input channel equalization
Monaural and stereo input peak indicators
Level meters
Graphic equalizer
Internal digital effect
Phantom power
Lamp connector
Power supply/Power consumption
Dimensions (W x H x D)
Weight
Accessories
For European Model
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 10A
Conformed Environment: E1, E2, E3 and E4
MV12/6 — Owner's Manual
20Hz—20kHz +1dB, -3dB @+4dB, 600Ω (INPUT GAIN Control at minimum level)
<0.1% (THD+N) @+14dB, 20Hz—20kHz, 600Ω
-128dB Equivalent input noise
-95dB Residual output noise
-64dB (68dB S/N) ST OUT:
Master fader and one channel fader at nominal level, channel
assign switch ON.
-90dB (94dB S/N) ST OUT:
Master fader at nominal level, all channel assign switches
OFF, all GROUP to ST switches OFF.
-90dB (94dB S/N) GROUP OUT:
Master fader at nominal level, all channel assign switches OFF.
-84dB (88dB S/N) AUX SEND, EFFECT SEND:
Master level control at nominal level, all channel send controls
at minimum level.
60dB INPUT (MIC) to INSERT OUT
84dB INPUT (MIC) to GROUP OUT
84dB INPUT (MIC) to ST OUT (CH to ST)
94dB INPUT (MIC) to ST OUT (GROUP to ST)
76dB INPUT (MIC) to AUX1 SEND, AUX2 SEND (PRE)
86dB INPUT (MIC) to AUX2 SEND (POST) , EFFECT SEND
58dB INPUT (LINE) to ST OUT (CH to ST)
58dB ST INPUT to ST OUT (CH to ST)
44dB variable
44dB variable
-70dB adjacent input
-70dB input to output (CH INPUT)
±15dB Maximum
HIGH 10kHz shelving
MID 2.5kHz peaking
LOW 100Hz shelving
* Turn over/Roll off frequency of shelving: 3dB below maximum variable level.
Red: Each channel, when the level of the post EQ signal for each channel exceeds
+17dB the indicator will light.
12 points LED x2
7 bands (125, 250, 500, 1k, 2k, 4k, 8kHz)
±12dB Maximum
16 types
+48V (balanced) : Supplied at the Input Select Switch = MIC(+48V) position
XLR type (Lamp Compatibility: AC or DC12V, 0.5A Max)
USA and Canadian: 120V AC 60Hz, 50W
General: 230V AC 50Hz, 50W
482 x 308 x 192 mm (7U Rack Mount Size)
9.0kg
3 pin Euro-block connectors: 18
Feet: 4
0dB=0.775Vrms