Table of Contents
Advertisement
Rev. (a)
Set Power Scheme Timers
Start > Settings > Control Panel > Power > Schemes
Change the parameter values and tap OK to save the changes.
User Idle
System Idle
Suspend
Shutdown
UPS Power Scheme
This power scheme is automatically selected any time the Thor VM2C is operating from UPS power. This scheme overrides
any user selected power configuration mode.
Switch state to User Idle
Switch state to System Idle
Switch state to Suspend
Shutdown
AC/DC Power Scheme
This power scheme is used when the AC/DC power configuration mode is selected.
Switch state to User Idle
Switch state to System Idle
Switch state to Suspend
Shutdown
Ignition Control Power Scheme, Ignition On
This power scheme is used when the Ignition Control power configuration mode is selected and the vehicle ignition is On.
Switch state to User Idle
Switch state to System Idle
Switch state to Suspend
Shutdown
An amount of time has passed, set by the User Idle timer, and the device shuts down a minimum
number of services e.g., backlights. The System Idle timer and the Suspend timer have not expired
yet.
An amount of time has passed, set by the System Idle timer, and the device shuts down a few more
services e.g., display. The System Idle timer has expired and the Suspend timer has not expired
yet.
Suspend mode is entered when (1) the unit is inactive for a predetermined period of time, (2) the
user taps the Power key, or (3) Start > Suspend is chosen. Inactivity means that internal devices
that reset the power state are not active and the Suspend Timer has expired.
An amount of time has passed, set by the Shutdown timer, and the Thor VM2C performs an orderly
shutdown.
Default is After 30 seconds
Default is After 1 minute
Default is After 10 minutes
Default is After 20 minutes
Default is After 15 minutes
Default is After 1 hour
Default is After 8 hours
Default is Never
Default is After 15 minutes
Default is After 1 hour
Default is After 8 hours
Default is Never
2-13
Advertisement
Table of Contents
