Power Up - Honeywell Thor VM2C User Manual

Rev. (a)

Power Up

If a USB drive, such as a thumb drive is attached to the Thor VM2C, the device attempts to boot from the USB
drive and cannot. Please remove the USB drive and power up the Thor VM2C again.
The Quick Mount Smart Dock has a power switch on the back.
The "On" side of this rocker switch has a raised bump to allow the state of the switch to be determined when the switch may
not be easily viewed, for example, after the Dock is mounted in a vehicle.
After external power has been connected and the Thor VM2C has been mounted in the Dock, press the side of the power
switch with the raised bump to pass power from the Dock to the Thor VM2C. Generally, once the Dock is powered On, there is
no need to power if Off.
Next locate the power button
Press the power button to turn the Thor VM2C on. When the Windows desktop is displayed or an application begins, the power
up sequence is complete.
on the front of the Thor VM2C.
2-11