Audio Output Mode; Hi-Fi Stereo Sound; Nicam/Igr Hi-Fi Stereo Sound - Sharp DV-NC65S Instruction Manual

Hide thumbs Also See for DV-NC65S:

Service manual (113 pages)

Table Of Contents

100

101

Table of Contents

Hi-Fi STEREO SOUND

Stereo sound is possible from this Unit if you have a stereo TV

connected to the Unit with a scart lead, or audio equipment con-

nected with audio phono leads. The Unit is normally set so that

stereo sound is possible. The sound output from the Unit is

controlled by AUDIO OUTPUT. If you wish to change the sound

output you can use AUDIO OUTPUT as follows:

• Press AUDIO OUTPUT once. The LEFT audio channel will be sent

to BOTH speakers. q will appear on the VCR Front Panel display.

• Press AUDIO OUTPUT again. The RIGHT audio channel will be

sent to BOTH speakers. w will appear on the VCR Front Panel

display.

• Press AUDIO OUTPUT a third time and the MONO track will be

sent to BOTH speakers. q and w will not appear on the VCR

Front Panel display.

• Pressing AUDIO OUTPUT a fourth time, normal Hi-Fi stereo sound

will be heard. q and w will appear on the VCR Front Panel

display.

NICAM/IGR Hi-Fi STEREO SOUND

Your Unit can receive and record NICAM/IGR sound. The Unit is

normally set so that NICAM/IGR sound is possible if it is present on

the receiving signal, otherwise the Unit will automatically switch to

receive the mono signal. NICAM/IGR sound can be turned off. If you

wish to do this follow the procedure below:

Press VCR MENU to display the menu screen.

Press ' / " to select "MODE" then press SET to confirm.

• The MODE menu will be displayed with NICAM selected.

Press SET to confirm and return to the menu screen.

Press VCR MENU to exit to normal screen.

• If the tape being played back does not carry sound recorded on Hi-Fi

tracks, L and R will not appear on the display.

• lf the sound contains 'crackling' or 'popping' noises the sound quality

may be improved by adjusting the tracking using CH ' / ".

• If the poor quality is for a long period the Unit will automatically select

the mono track and the sound will be in mono.

• NICAM sound may not be stereo.

DVNC65SE054_062.pm6

Downloaded from:

http://www.usersmanualguide.com/

NICAM

AUTO

OFF

COLOUR

AUTO

PAL MESECAM

BLUE MUTE

AUTO

OFF

REPEAT

OFF

16:9

AUTO

OFF

SUPER.P

OFF

:SELECT

:CHANGE

SET :ENTER

MENU:EXIT