Technical Specifications - Helios HPS-PS-STANDALONE-SR100HL User Manual

100w dc ups
Table of Contents

Advertisement

SR100Hi Series - 100W DC UPS

11. Technical Specifications

Output power
Input Voltage
Output Voltages
Voltage Adj. Range
Overcurrent protection
Isolation
Efficiency
Operating temperature
Humidity
Cooling
LVD
LED Indication
Alarms Relay
Temp. Compensation
Battery Charge Current Limit
Reverse Polarity
Battery Monitoring
Battery Circuit Protection
Line Regulation
Load Regulation
Noise
Thermal Protection
Hold-up Time
AC input connector
DC Connections
Alarm connections
Enclosure
Dimensions
Weight
STANDARDS
EMC
Safety
New Zealand: sales@heliosps.co.nz - Australia: sales@heliosps.com.au - Middle East & Asia: sales@heliosps.asia
100W
180V - 264VAC 45-65Hz
12V, 24V, 30V, 36V, 48 VDC
85% - 120% of Vnominal
Constant current limit under overload and short circuit conditions
Input – earth – 2.5KVdc
Output – earth - 500Vdc
> 85%
-20 to 50 °C ambient at full load
0 - 95% relative humidity non - condensing
Natural convection
Low Voltage Disconnect
Green: Batt OK
Green: Power OK
Form C contacts 30VDC,2A/110VDC,0.3A,125VAC, 0.5A
AUX (Activated by BCT)
POWER (main fails, PSU fails)
BATTERY (batt missing , batt low, BCT fail)
Temperature sensor on 1.7m lead with adhesive pad: -4mV/ °C / cell ± 10%
Customizable on request.
Battery reverse connection will open internal fuse (and produce alarm)
Detects for presence of battery on start up, then every 60 minutes when charge current
< 200mA
Electronic circuit breaker (ECB) operates under the following conditions:
- Low Battery Volts: Battery Voltage drops to 1.67V/cell
Overload: Max load must not exceed 110% of rated current. Peak loads must be
connected to B+ & B– terminals. Not suitable for N+1 connection.
Short Circuit: <2ms, backed up by fuse
< 0.04% over AC input range
< 0.5% open circuit to 100 % load
< 0.3%
Yes, self-resetting
15 - 20 ms (nom - max. Vin) without battery
IEC60320— C13 10A input socket (similar to PCs etc)
Plug-in style socket & mating screw terminal block: (max. wire 2.5mm² / way)
Plug in screw terminal block
Zinc plated & powder coated steel
147W x 177D x 62H (± 1mm)
0.95 Kg
To CISPR 22 / EN55022 class A
To IEC950 / EN60950 / AS/NZS3260
11111111
www.heliosps.com
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sr100hi series

Table of Contents