Transpose Buttons - Yamaha Artiste AR-100 Owner's Manual

TRANSPOSE Buttons

Transpose can also be set from the panel, with the TRANSPOSE
/ buttons. Press TRANSPOSE
´ Ï
setting by a half-step, and press TRANSPOSE
The current Transpose setting is shown in the Voice Display.
Current Transpose setting.
DATA CONTROL
About the Pitch of the Voice Sections
The various Voice sections and sounds of the instrument are set to different pitches (as shown
below).
+6.0
+3.0
+2.4
+1.2
(Standard 440Hz) 0
-1.2
-3.6
to raise the Transpose
Ï
TRANSPOSE
COARSE
Cent
LEAD1
UPPER ORGAN
UPPER1
UPPER2
LOWER1, LOWER ORGAN, KEYBOARD PERCUSSION, ACCOMPANIMENT
LOWER2
PEDAL1&2, PEDAL ORGAN
13.
Pitch Controls
´ to lower it.
VOICE EFFECT
DISPLAY SET
FOOT REGIST.
SW. SHIFT
M.O.C./ VOICE
L.M.SPLIT EDIT
ACCOMP. SEQUENCE
PROGRAM PROGRAM
PITCH/
DISK MIDI
HELP HOLD
TRANSPOSE
• The default Pitch setting is
440.0Hz (at A3).
• Pitch changes cannot be
recorded to the Music Disk
Recorder.
When tuning the AR-100 to
match the pitch of another
instrument, use the Clarinet
voice on the Lower keyboard,
and make sure that effects
such as Tremolo or
Symphonic are turned off.
161