Yamaha Artiste AR-80 Electone Owner's Manual page 96

7.
After the elapsed recording time appears on
both displays, begin playing.
There is a slight pause for setup, during which the M.D.R.
records Registration and other data. Once the setup
operation is complete, the elapsed recording time (starting
at 00:00) appears in both the M.D.R. LED display and the
main display, indicating that you can begin recording your performance.
Retry Function
If you make a mistake during recording:
1.While the M.D.R. is still recording, press the Data Control button
corresponding to RETRY in the display.
You can perform the same operation by pressing the PLAY button (or by selecting PLAY in
the display).
MUSIC DISK RECORDER
STOP PLAY
This stops the recording and returns you to the starting point of the song.
The letters "rE" (retry) appear on the left side of the LED display (with the song number
on the right) and the PLAY LED starts flashing, indicating that you can re-record the
song.
2.Press PLAY again to begin re-recording the song.
Re-recording starts immediately from the beginning of the song and replaces the
previously recorded performance with the newly recorded performance.
DISK IN USE
rE01
SONG SELECT REC
DATA CONTROL
90
The short time it takes to set up
for recording is recorded as well,
causing a short pause before
playback of the song.